Structural pipes

Round structural pipes

Round structural pipes

They are delivered to standard SRPS EN 10219-1 cold-formed, round, square and rectangular cross-section steel tubes for structures, shape and dimensions in standard SRPS EN 10219-2 welded steel tubes, shape and dimensions – without dimension testing:

outer diameter of 17,2 – 711 mm
wall thickness 1,5 – 12,5 mm

Round tubes are also supplied as standard SRPS EN 10217-2 i SRPS EN 10255 steel tubes without mechanical properties, for pipe thread and dimensions – hydro-tested.

Product dimensions:

Outer diameter (mm)	Wall thickness (mm)
	1,5	1,8	2	2,5	2,6	3	3,25	3,5	4	4,5	5	5,6	6,3	7,1	8	10	11	12,5
	Longitudinal mass (kg/m)
17,2	0,58	0,68	0,75	0,91
21,3	0,73	0,86	0,95	1,16	1,20
25,4	0,88	1,05	1,15	1,41	1,46
26,9	0,94	1,11	1,23	1,50	1,56
31,8	1,12	1,33	1,47	1,81
33,7	1,19	1,42	1,56	1,92	1,99	2,27	2,44	2,61
38	1,35	1,61	1,78	2,19		2,59
40	1,42	1,69	1,87	2,31		2,74
42,4	1,51	1,80	1,99	2,46	2,55	2,91	3,14
44,5	1,59	1,90	2,10	2,59		3,07	3,30
48,3	1,73	2,06	2,28	2,82		3,35	3,61	3,86	4,37
51	1,83	2,18	2,42	2,99		3,55	3,83	4,10
56		2,40	2,66	3,33		3,92	4,23	4,53
60,3	2,17	2,60	2,88	3,56		4,24	4,57	4,90	5,55	6,19	6,82
63,25			3,02	3,74		4,46	4,81
76,1	2,76		3,65	4,54		5,41	5,84	6,26	7,11	7,95	8,77
88,9			4,29	5,32	5,53	6,35	6,86	7,37	8,38	9,37	10,30
101,6				6,11		7,29	7,88	8,46	9,63	10,80	11,90
108						7,76	8,39	9,02	10,30	11,50	12,70
114,3						8,23	8,90	9,56	10,90	12,20	13,50
127						9,17		10,65	12,10		15,00
133						9,61	10,39	11,17	12,70	14,30	15,80	17,60
139,7									13,40	15,00	16,60	18,50
159									15,30	17,10	19,00	21,20
168,3									16,20	18,20	20,10	22,50	25,20
219,1											26,40	29,50	33,10	37,10	41,60
273											33,00	36,90	41,40	46,60	52,30
323,9											39,30	44,00	49,30	55,50	62,30	77,40
355,6											43,20	48,30	54,30	61,00	68,60	85,20
406,4											49,50	55,40	62,20	69,90	78,60	97,80
457											55,70	62,30	70,00	78,80	88,60	110,00
508											62,00	68,40	77,90	87,70	98,60	123,00	135,00
610												83,50	93,80	106,00	119,00	148,00	162,00	184,00
711													109,00	123,00	139,00	173,00	190,00	215,00

Dimensions and longitudinal mass defined by the standard EN 10220

Product Specifications:

Deviations in dimensions and shape

	Round tubes
External dimensions	±1%, min±0,5mm max±1,0mm
Wall thickness	D≤406,4 T≤5mm ±10%
	D≤406,4 T>5mm ±0,5mm
	D>406,4 ±10%(max±2mm)
Deviation from roundness *	2% for pipes with D/T≤100
Concavity / convexity	/
Page rectangle	/
External rounding	/
Weirdness	/
rightness	0,20% total length

Variations in dimensions and shape according to the standard EN10219-2

*for D / T & gt; 100 deviations from roundness are agreed with the customer
T – thickness of pipe wall
D – outer diameter of pipe
H,B – page dimensions

Chemical composition

Steel grade		% from the masses, max						Max CEV %
Steel name	Steel number	C	Si	Mn	P	S	N	Max CEV %
S235JRH	1.0039	0,17	–	1,40	0,040	0,040	0,009	0,35
S275J0H	1.0149	0,20	–	1,50	0,035	0,035	0,009	0,40
S275J2H	1.0038	0,20	–	1,50	0,030	0,030	–	0,40
S355J0H	1.0547	0,22	0.55	1,60	0,035	0,035	0,009	0,45
S355J2H	1.0576	0,22	0.55	1,60	0,030	0,030	–	0,45
S355K2H	1.0512	0,22	0.55	1,60	0,030	0,030	–	0,45

The chemical composition defined by the standard EN10219-1

Mechanical characteristics

Steel grade		Minimum yield strenght ReH		Tensile strenght Rm		Minimum elongation A	Minimum impact energy KV
Steel name	Steel number	MPa		Mpa		%	J
		Specified thickness		Specified thickness		Specified thickness	at test temperature of
		mm		mm
		≤ 16	> 16 ≤ 40	< 3	≥ 3 ≤ 40	≤ 40
S235JRH	1.0039	235	225	360-510	360-510	24	24
S275J0H	1.0149	275	265	430-580	410-560	20	27
S275J2H	1.0038
S355J0H	1.0547	335	345	510-680	470-630	20	27
S355J2H	1.0576
S355K2H	1.0512

Mechanical characteristics according to standard EN10219-1

Square construction pipes

Kvadratne konstrukcione cevi

Supplied according to the standard SRPS EN 10219-1 welded steel tubes, cold formed, round, square and rectangular in cross section for the construction, shape and dimensions of SRPS EN 10219-1 welded steel tubes, shape and dimensions – without hydro testing in dimensions:

sides of a 13 x 13 mm square, up to 160 x 160 mm
wall thickness 1,5 – 6,0 mm

Product dimensions:

Pages of the square (mm)	Wall thickness (mm)
	1,5	1,8	2	2,5	3	3,5	4	5	6
	Longitudinal mass (kg/m)
13×13	0,52	0,63	0,66
15×15	0,62	0,75	0,79
16×16	0,66	0,80	0,84
18×18	0,74	0,92	0,95
20×20	0,84	1,03	1,10
25×25	1,08	1,31	1,45
30×30	1,29	1,59	1,38	2,16	2,54
35×35	1,51	1,88	2,03	2,55	3,01
40×40	1,91	2,16	2,38	2,49	3,49	4,01	4,52
50×50	2,28	2,72	3,01	3,72	4,28	5,11	5,51	6,39
60×60	2,76	3,29	3,65	4,50	5,22	6,21	6,76	8,13
70×70			4,26	5,29	6,16	7,31	8,02	9,70
80×80				6,07	7,10	8,41	9,28	11,30
90×90					8,04	9,51	10,50	12,80
100×100					8,99	10,61	11,80	14,40	17,71
110×110					9,90	11,70	12,99	15,81	18,62
120×120					10,84	12,80	14,25	17,38	20,51
130×130							15,82	19,62	23,36
140×140							17,19	21,36	25,49
150×150							18,01	22,09	26,16
160×160							19,40	23,76	28,04

Dimensions and longitudinal mass defined by the standard EN 10220

Product Specifications:

Deviations in dimensions and shape

	Rectangular and square pipes
External dimensions	H,B<100 ±1%(min±0,5mm)
	100≤H,B≤200 ±0,8%
	H,B>200 ±0,6%
Wall thickness	T≤5mm ±10%
	T>5mm ±0,5mm

Deviation from roundness *	/
Concavity / convexity	max 0,8% min 0,5%
Page rectangle	90º ±1%
External rounding	T≤6mm 1,6T do 2,4T
	6
	10>T 2,4T do 3,6T
Weirdness	2mm+0,5mm per meter in length
rightness	0,15% total length

Variations in dimensions and shape according to the standard EN10219-2

* for D / T & gt; 100 deviations from roundness are agreed with the customer
T – thickness of pipe wall
D – outer diameter of pipe
H,B – page dimensions

Chemical composition

Steel grade		% from the masses, max						Max CEV %
Steel name	Steel number	C	Si	Mn	P	S	N	Max CEV %
S235JRH	1.0039	0,17	–	1,40	0,040	0,040	0,009	0,35
S275J0H	1.0149	0,20	–	1,50	0,035	0,035	0,009	0,40
S275J2H	1.0038	0,20	–	1,50	0,030	0,030	–	0,40
S355J0H	1.0547	0,22	0.55	1,60	0,035	0,035	0,009	0,45
S355J2H	1.0576	0,22	0.55	1,60	0,030	0,030	–	0,45
S355K2H	1.0512	0,22	0.55	1,60	0,030	0,030	–	0,45

The chemical composition defined by the standard EN10219-1

Mechanical characteristics

Steel grade		Minimum yield strenght ReH		Tensile strenght Rm		Minimum elongation A	Minimum impact energy KV
Steel name	Steel number	MPa		Mpa		%	J
		Specified thickness		Specified thickness		Specified thickness	at test temperature of
		mm		mm
		≤ 16	> 16 ≤ 40	< 3	≥ 3 ≤ 40	≤ 40
S235JRH	1.0039	235	225	360-510	360-510	24	24
S275J0H	1.0149	275	265	430-580	410-560	20	27
S275J2H	1.0038	275	265	430-580	410-560	20	27
S355J0H	1.0547	335	345	510-680	470-630	20	27
S355J2H	1.0576
S355K2H	1.0512

Mechanical characteristics according to standard EN10219-1

Rectangular structural pipes

Rectangular structural pipes

20 x 10 mm rectangle sides
wall thickness 1.5 – 6.0 mm

Product dimensions:

Page Dimensions (mm)	Wall thickness (mm)
	1,5	1,8	2	2,5	3	3,5	4	4,5	5	6
	Longitudinal mass (kg/m)
20×10			0x79
30×20	1×07	1,31	1,45	1,77
30×15	0,95	1,17	1,24
40×20	1,29	1,59	1,74	2,16	2,54
40×30	1,51	1,88	2,03	2,55	3,01
50×30	1,81	2,16	2,38	2,94	3,49
50×40	2,05	2,44	2,70	3,34	3,96	4,56
60×20	1,81	2,16	2,38
60×30	2,05	2,44	2,70	3,34
60×40	2,29	2,72	3,01	3,72	4,28	5,11	5,51
70×50			3,65	4,54	5,51	6,21	7,11
80×40			3,64	4,50	5,22	6,21	6,76
80×50				4,90	5,69
80×60			4,26	5,29	6,16	7,31	8,02	9,26
100×40			4,26	5,29	6,16	7,31	8,02	9,26
100×50				5,68	6,63	7,86	8,65
100×60				6,07	7,10	8,41	9,28	10,67	11,30
100×80				6,86	8,04	9,51	10,50	12,08	12,80
120×40				6,07	7,10	8,41	9,28	10,67
120×60					8,04	9,51	10,50	12,08	12,80
120×80					9,17	10,61	12,13	13,49	15,03
120×100					10,03	11,70	12,99	14,91	15,81
140×60							11,73	13,49	14,24
140×80					9,90	11,70	12,99	14,91	15,81
150×100							15,20	17,03	18,17	21,45
160×100							15,83	17,73	19,63	23,36
200×80							17,08	19,15	21,20	25,25
200×100							18,01	20,56		26,16

Dimensions and longitudinal mass defined by the standard EN 10220

Product Specifications:

Deviations in dimensions and shape

	Rectangular and square pipes
External dimensions	H,B<100 ±1%(min±0,5mm)
	100≤H,B≤200 ±0,8%
	H,B>200 ±0,6%
Wall thickness	T≤5mm ±10%
	T>5mm ±0,5mm

Deviation from roundness *	/
Concavity / convexity	max 0,8% min 0,5%
Page rectangle	90º ±1%
External rounding	T≤6mm 1,6T do 2,4T
	6<t≤10mm 2,0t=”” do=”” 3,0t<=”” td=””> </t≤10mm >
	10>T 2,4T do 3,6T
twists	2mm+0,5mm per meter in length
rightness	0,15% total length

Variations in dimensions and shape according to the standard EN10219-2

* for D / T & gt; 100 deviations from roundness are agreed with the customer

T – thickness of the pipe wall
D – outer diameter of the pipe
H, B – Page dimensions

Chemical composition

Steel grade		% from the masses, max						Max CEV %
Steel name	Steel number	C	Si	Mn	P	S	N	Max CEV %
S235JRH	1.0039	0,17	–	1,40	0,040	0,040	0,009	0,35
S275J0H	1.0149	0,20	–	1,50	0,035	0,035	0,009	0,40
S275J2H	1.0038	0,20	–	1,50	0,030	0,030	–	0,40
S355J0H	1.0547	0,22	0.55	1,60	0,035	0,035	0,009	0,45
S355J2H	1.0576	0,22	0.55	1,60	0,030	0,030	–	0,45
S355K2H	1.0512	0,22	0.55	1,60	0,030	0,030	–	0,45

The chemical composition defined by the standard EN10219-1

Mechanical characteristics

Steel grade		Minimum yield strenght ReH		Tensile strenght Rm		Minimum elongation A	Minimum impact energy KV
Steel name	Steel number	MPa		Mpa		%	J
		Specified thickness		Specified thickness		Specified thickness	at test temperature of
		mm		mm
		≤ 16	> 16 ≤ 40	< 3	≥ 3 ≤ 40	≤ 40
S235JRH	1.0039	235	225	360-510	360-510	24	24
S275J0H	1.0149	275	265	430-580	410-560	20	27
S275J2H	1.0038	275	265	430-580	410-560	20	27
S355J0H	1.0547	335	345	510-680	470-630	20	27
S355J2H	1.0576
S355K2H	1.0512

Mechanical characteristics according to standard EN10219-1

Structural pipes

Address

Work hour

Latest news